Reminder
01. Do not use non-Super Flower supplied cable, connector or adapter, it could lead to voltage drop and damage to the PSU.
02. SLI cable (6pin & 6+2pin or 6+2 pin & 6+2pin) must consider graphic card’s actual power consumption and must avoid using single SLI cable to power 2 graphic cards at same time; it will result in a double power loading output which will excess the cable design limitation.
03. Molex 4pin to PCI-E or SATA to PCI-E adapters should be prohibited to use to power the graphic card or CPU.
04. Make sure the built system are within the PSU design power wattage. When using multi-graphic card bitcoin mining system, industrial grade multi-CPU servers or any high-power consumption systems, please consider using at least 2 PSU for power diversion to the system to avoid any over power problem which could lead to serious damage to the PSU.
05. Please turn on the power supply with a connection to the computer. If not, it may cause the damage to the power supply.
06. When PSU been used in high-temperature working environment (such as: the computer chassis ambient temperature is above 50℃), it will accelerate the wear and tear of components, extra care must be taken to have enough space for heat dissipation.
07. Before wire connector installation, please check whether the metal has been oxidized or loosed. Also, beware if the wire shakes easily after connecting with the hardware.
08. User need to consider external environmental factors (e.g., extreme humidity, dusty accumulation) and regular maintenance to avoid power supply in poor performance due to working in unsuitable environments.
09. If it is regular to plug and install the joint, please beware if the metal has become fatigued or wear and tear, and lead the metal to an excess contact area.
10. When inserting and removing the wire connector, please pay attention to the direction of the plug and receptacle, correct and complete angle to avoid the bad connection.